Skip to main content
Peer-Reviewed Journal Papers
  • M. Fasil, D. Plesner, J. H. Walther, N. Mijatovic, J. Holboll, B. B. Jensen, “Numerical and Experimental Investigation of Heat Flow in Permanent Magnet Brushless DC Hub Motor,” SAE International Journal of Alternative Powertrains, No. V124-8EJ, May 2015.
  • B. B. Jensen, E. Guest, B. C. Mecrow, “Modeling Overlapping Laminations in Magnetic Core Materials Using Two Dimensional Finite Element Analysis,” IEEE Transactions on Magnetics, Vol. , No. , pp. , Accepted for publication, DOI: 10.1109/TMAG.2014.2367475.
  • M. L. Henriksen, B. B. Jensen, “Incorporation of Finite Element Analysis into Annual Energy Loss Estimation for Permanent Magnet Wind Turbine Generators,” IEEE Transactions on Industry Applications, Vol. , No. , pp. , Early access from July 2014. http://dx.doi.org/10.1109/TIA.2014.2341738
  • N. Mijatovic, B. B. Jensen, “Armature reaction effects on a high temperature superconducting field winding of a synchronous machine: experimental results,”  Journal of Physics: Conference Series, Vol. 507, No. 3, pp. 032032, 2014. http://dx.doi.org/10.1088/1742-6596/507/3/032032
  • A. B. Abrahamsen, N. Magnusson, B. B. Jensen, D. Liu, H. Polinder, “Design of an MgB2 race track coil for a wind generator pole demonstration,”  Journal of Physics: Conference Series, Vol. 507, No. 3, pp. 032001, 2014. http://dx.doi.org/10.1088/1742-6596/507/3/032001
  • B. B. Jensen, N. Mijatovic, M. L. Henriksen, “Magnet Free Generators – 3rd Generation Wind Turbine Generators,” MagNews Winter 2013, UK Magnetic Society, ISSN 1354-817, Jan. 2014. (Invited)
  • M. Pozzi, N. Mijatovic, B. B. Jensen, “Topology Optimization of a High Temperature Superconducting Field Winding of a Synchronous Machine,” IEEE Transactions on Applied Superconductivity, Vol. 23, No. 6, Dec. 2013. http://dx.doi.org/10.1109/TASC.2013.2279425
  • V. M. R. Zermeno, A. B. Abrahamsen, N. Mijatovic, B. B. Jensen, M. P. Sørensen, “Calculation of AC losses in stacks and coils made of second generation high temperature superconducting tapes for large scale applications,” Journal of Applied Physics – American Institute of Physics, Vol. 114, No. 17, pp. 173901, Nov. 2013. http://dx.doi.org/10.1063/1.4827375
  • H. Polinder, J. A. Ferreira, B. B. Jensen, A. B. Abrahamsen, K. Atallah, R. A. McMahon, “Trends in Wind Turbine Generator Systems,” IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol. 1, No. 3, Sept. 2013. dx.doi.org/10.1109/JESTPE.2013.2280428 (invited)
  • S. Hogberg, B. B. Jensen, F. B. Bendixen, “Design and Demonstration of a Test-Rig for Static Performance-Studies of Permanent Magnet Couplings,” IEEE Transactions on Magnetics, Vol. 49, No. 12, pp. 5664-5670, 2013. http://dx.doi.org/10.1109/TMAG.2013.2274645
  • B. B. Jensen, N. Mijatovic, A. B. Abrahamsen, “Reducing Conductor Usage in Superconducting Machines by Multiple Power Supplies,” IEEE Transactions on Applied Superconductivity, ISSN: 1051-8223, Vol. 23, No. 5, pp. 5202708, 2013. http://dx.doi.org/10.1109/TASC.2013.2262655
  • B. B. Jensen, N. Mijatovic, A. B. Abrahamsen, “Development of Superconducting Wind Turbine Generators,” Journal of Renewable and Sustainable Energy – American Institute of Physics, Vol. 5, pp. 023137, 2013. dx.doi.org/10.1063/1.4801449 (invited)
  • B. B. Jensen, A. B. Abrahamsen, M. P. Sørensen, J. B. Hansen, “A Course on Applied Superconductivity Shared by Four Departments,” Journal of US-China Education Review A & B, Vol. 3, No. 4, April 2013. (invited)
  • R. Sharma, T. W. Rasmussen, B. B. Jensen, ”Application of a synchronous generator with a boost converter in wind turbines: an experimental overview,” IET Renewable Power Generation, ISSN: 1752-1416, Vol. 6, No. 6,  pp. 414-423, 2012. http://dx.doi.org/10.1049/iet-rpg.2011.0210
  • B. B. Jensen, S. Högberg, F. F. Jensen, N. Mijatovic, “Enhanced Learning through Design Problems – Teaching a Components-Based Course through Design,” European Journal of Engineering Education (EJEE) - Taylor & Francis, ISSN: 0304-3797, Vol. 37, No. 4, pp. 375-382, 2012. http://dx.doi.org/10.1080/03043797.2012.700303
  • A. B. Abrahamsen, N. Magnusson, B. B. Jensen, M. Runde, “Large Superconducting Wind Turbine Generators,” Energy Procedia - Elsevier, ISSN: 1876-6102, Vol. 24, pp. 60-67, 2012. http://dx.doi.org/10.1016/j.egypro.2012.06.087
  • A. B. Abrahamsen, B. B. Jensen, “Design Study of Coated Conductor Direct Drive Wind Turbine Generator for Small Scale Demonstration,” Physics Procedia – Elsevier, ISSN: 1875-3892, Vol. 36, pp. 735-758, 2012. http://dx.doi.org/10.1016/j.phpro.2012.06.038
  • N. Mijatovic, B. B. Jensen, C. Træholt, A. B. Abrahamsen, V. M. R. Zermeno, N. F. Pedersen, “An HTS Machine Laboratory Prototype,” Physics Procedia – Elsevier, ISSN: 1875-3892, Vol. 36, pp. 771-776, 2012. http://dx.doi.org/10.1016/j.phpro.2012.06.041
  • V. M. R. Zermeno, A. B. Abrahamsen, N. Mijatovic, M. P. Sørensen, B. B. Jensen, N. F. Pedersen, “Simulation of an HTS Synchronous Superconducting Generator,” Physics Procedia – Elsevier, ISSN: 1875-3892, Vol. 36, pp. 786-790, 2012. http://dx.doi.org/10.1016/j.phpro.2012.06.043
  • J. G. Washington, G. J. Atkinson, N. J. Baker, A. G. Jack, B. C. Mecrow, B. B. Jensen, L.-O. Pennander, G. L. Nord, L. Sjoberg, “Three-Phase Modulated Pole Machine Topologies Utilizing Mutual Flux Paths,” IEEE Transactions on Energy Conversion, Vol. 27, No. 2, pp. 507-515, June 2012. http://dx.doi.org/10.1109/TEC.2012.2184115
  • B. B. Jensen, A. G. Jack, G. J. Atkinson, B. C. Mecrow, ”Performance of a Folded-Strip Toroidally Wound Induction Machine,” IEEE Transactions on Industrial Electronics, Vol. 59, No. 5, May 2011. http://dx.doi.org/10.1109/TIE.2011.2138115
  • S. Hosseini, J. S. Moghani, B. B. Jensen, “Accurate Modeling of a Transverse Flux Permanent Magnet Generator Using 3D Finite Element Analysis,” Advances in Electrical and Computer Engineering (AECE), Vol. 11, No. 3, pp. 115-120, 2011. http://dx.doi.org/10.4316/AECE.2011.03019
  • S. Hosseini, J. S. Moghani, B. B. Jensen, “Investigating the Effects of I-Shaped Cores in an Outer-Rotor Transverse Flux Permanent Magnet Generator,” International Review of Electrical Engineering (IREE), Vol. 6, No. 3, pp. 1187-1195, June 2011.
  • S. Hosseini, J. S. Moghani, N. F. Ershad, B. B. Jensen, “Design and Finite Element Analysis of a Novel Transverse Flux Permanent Magnet Disk Generator,” International Review of Electrical Engineering (IREE), Vol. 6, No. 1, pp. 229-237, Jan-Feb 2011.
  • A. B. Abrahamsen, B. B. Jensen, E. Seiler, N. Mijatovic, R. C. V. Manuel, N. H. Andersen, J. Østergaard, ”Feasibility study of 5 MW superconducting wind turbine generator,” Physica C: Superconductivity and its Applications - 2011, Vol. 471, No. 21-22, pp. 1464-1469, Elsevier. dx.doi.org/10.1016/j.physc.2011.05.217  (invited)
  • S. Hosseini, J. S. Moghani, N. F. Ershad, B. B. Jensen, “Design, Prototyping, and Analysis of a Novel Modular Permanent Magnet Transverse Flux Disk Generator,” IEEE Transactions on Magnetics, Vol. 47, No. 4, pp. 772-780, Apr. 2011. http://dx.doi.org/10.1109/TMAG.2010.2103365
  • N. Mijatovic, B. B. Jensen, C. Træholt, V. M. Rodriguez-Zermeno, M. P. Sørensen, A. B. Abrahamsen, “Coil Optimization for HTS Machines,” IEEE Transactions on Applied Superconductivity, Vol. 21, No. 3, pp. 1136-1140, June 2011. http://dx.doi.org/10.1109/TASC.2010.2094171
  • B. B. Jensen, “Oral Assessment in Engineering Education”, International Journal of Electrical Engineering Education (IJEEE), Vol. 47, No. 4, pp. 375-379(5), Oct. 2010.
Peer-Reviewed Conference Papers
  • G. A. Skrimpas, C. W. Sweeney, K. S. Marhadi, B. B. Jensen, N. Mijatovic, J. Holboll, “Detection of Wind Turbine Power Performance Abnormalities Using Eigenvalue Analysis,” 2014 Annual Conference of the Prognostics and Health Management Society (PHM 2014), Fort Worth, Texas USA, Oct. 2014.
  • M. Fasil, D. Plesner, J. H. Walther, N. Mijatovic, J. Holboll, B. B. Jensen, “Numerical and Experimental Investigation of Heat Flow in Permanent Magnet Brushless DC Hub Motor,” SAE 2014 International Powertrain, Fuels & Lubricants Meeting (SAE 2014), Birmingham, UK, Oct. 2014.
  • S. Hogberg, B. B. Jensen, N. Mijatovic, F. B. Bendixen, J. Holboll, “Parametric Design Optimization of a Novel Permanent Magneti Coupling Using Finite Element Analysis,” IEEE Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh, Pennsylvania, USA, Sept. 2014. (Best Student Poster Award)
  • S. Hogberg, H. Hansen, B. B. Jensen, F. B. Bendixen, “Influence of End-Effects on Static Torque Performance of Misaligned Cylindrical Permanent Magnet Couplings,” 21st International Conference on Electrical Machines (ICEM 2014), Berlin, Germany, Sept. 2014.
  • G. A. Skrimpas, C. W. Sweeney, B. B. Jensen, N. Mijatovic, J. Holboll, “Analysis of Generator Bearing Vibration Data for Diagnosing Rotor Circuit Malfunction in DFIGs,” 21st International Conference on Electrical Machines (ICEM 2014), Berlin, Germany, Sept. 2014.
  • X. Song, N. Mijatovic, B. B. Jensen, “Design study of a fully superconducting generator employing MgB2,” Applied Superconductivity Conference (ASC 2014), Charlotte, North Carolina, USA, Aug. 2014.
  • M. L. Henriksen, B. B. Jensen, “Trends in Wind Turbine Generators, and the Role of Electrical Steels,” 6th International Conference on Magnetism and Metallurgy (WMM 2014), Cardiff, UK, June 2014. (Invited)
  • B. B. Jensen, N. Mijatovic, P. J. Masson, “A Review of Superconducting Machines,” IEEE International Magnetics Conference (INTERMAG Europe 2014), Dresden, Germany, May 2014. (Invited)
  • D. G. Dorrell, A. Hermann, B. B. Jensen, “Analysis of Unbalanced Magnetic Pull in Wound Rotor Induction Machines using Finite Element Analysis – Transient, Motoring and Generating Modes,” 39th Annual Conference of the IEEE Industrial Electronics Society (IECON2013), Vienna, Austria, Nov. 2013.
  • B. B. Jensen, N. Mijatovic, M. L. Henriksen, “Magnet Free Generators – 3rd Generation Wind Turbine Generators,” Proceedings of UK Magnetic Society Conference on Materials and Applications 2013, Aalborg, Denmark, Oct. 2013. (Invited)
  • G. A. Skrimpas, K. S. Marhadi, B. B. Jensen, ”Automatic Mechanical Fault Assessment of Small Wind Energy Systems in Microgrids Using Electric Signature Analysis, “ IEEE 4th European Innovative Smart Grid Technologies (ISGT2013), Copenhagen, Denmark, Oct. 2013.
  • N. Mijatovic, B. B. Jensen, “Armature Reaction Effects on HTS Field Winding in HTS Machine,” European Conference on Applied Superconductivity (EUCAS2013), Genova, Italy, Sept. 2013.
  • A. B. Abrahamsen, N. Magnusson, M. Runde, B. B. Jensen, “Design of MgB2 Coil for Wind Turbine Generator Pole Demonstration,” European Conference on Applied Superconductivity (EUCAS2013), Genova, Italy, Sept. 2013.
  • M. Fasil, B. B. Jensen, “Electric two wheelers, zero emission solution for urban door to door transportation,” DTU International Energy Conference 2013, Lyngby, Denmark, Sept. 2013.
  • M. L. Henriksen, B. B. Jensen, ”Strategies for Inclusion of Structural Mass Estimates in the Direct-Drive Generator Optimization Process,” Nordic Insulation Symposium (NORD-IS2013), Trondheim, Norway, June 2013. (Invited)
  • M. L. Henriksen, B. B. Jensen, ”Incorporation of Finite Element Analysis into Annual Energy Loss Estimation for Permanent Magnet Wind Turbine Generators,” IEEE International Electric Machines and Drives Conference (IEMDC2013), Chicago, Illinois, USA, May 2013. http://dx.doi.org/10.1109/IEMDC.2013.6556150
  • S. Högberg, B. B. Jensen, F. B. Bendixen, ”Improving Torque per Kilogram Magnet of Permanent Magnet Couplings using Finite Element Analysis,” IEEE International Electric Machines and Drives Conference (IEMDC2013), Chicago, Illinois, USA, May 2013. http://dx.doi.org/10.1109/IEMDC.2013.6556229
  • N. Magnusson, B. B. Jensen, A. B. Abrahamsen, A. Nysveen, “Superconducting Generator Technology for Large Offshore Wind Turbines,” 10th Deep Sea Offshore Wind R&D Conference (DeepWind2013), Trondheim, Norway, January 2013. (Invited)
  • V. M. R. Zermeno, A. B. Abrahamsen, N. Mijatovic, B. B. Jensen, M. P. Sørensen, ”Calculation of AC Losses in HTS Stacks and Coils,” International Conference on Coated Conductors for Applications (CCA2012), Heidelberg, Germany, November 2012.
  • A. B. Abrahamsen, B. B. Jensen, ”Comparison of MgB2 and Coated Conductor Based 5 MW Superconducting Wind Turbine Generator,” Applied Superconductivity Conference (ASC2012), Portland, Oregon, USA, October 2012.
  • V. M. R. Zermeno, A. B. Abrahamsen, N. Mijatovic, B. B. Jensen, M. P. Sørensen, ”Calculation of AC Losses in HTS Stacks and Coils for Large Scale Applications,” Applied Superconductivity Conference (ASC2012), Portland, Oregon, USA, October 2012.
  • V. M. R. Zermeno, A. B. Abrahamsen, N. Mijatovic, B. B. Jensen, M. P. Sørensen, ”Model and Simulation of a HTS Generator Under Transient Response,” Applied Superconductivity Conference (ASC2012), Portland, Oregon, USA, October 2012.
  • B. B. Jensen, N. Mijatovic, A. B. Abrahamsen, “Development of Superconducting Wind Turbine Generators,” Scientific Proceedings of European Wind Energy Conference & Exhibition (EWEA2012), pp. 134-138, Copenhagen, Denmark, April 2012. (Invited)
  • M. L. Henriksen, B. B. Jensen, “Comparison of Megawatt-Class Permanent Magnet Wind Turbine Generator Concepts,” Scientific Proceedings of European Wind Energy Conference & Exhibition (EWEA2012), Copenhagen, Denmark, April 2012.
  • J. G. Washington, G. J. Atkinson, N. J. Baker, A. G. Jack, B. C. Mecrow, B. B. Jensen, L.-O. Pennander, G. L. Nord, L. Sjoberg, “An Improved Torque Density Modulated Pole Machine for Low Speed High Torque Application,” Proceedings of IET Power Electronics, Machines and Drives Conference 2012 (PEMD2012), pp. , Bristol, United Kingdom, March 2012.
  • A. B. Abrahamsen, N. Magnusson, B. B. Jensen, M. Runde, “Large Superconducting Wind Turbine Generators: Driving Down the Cost,” 9th Deep Sea Offshore Wind R&D Conference (DeepWind2013), Trondheim, Norway, January 2012. (Invited)
  • B. B. Jensen and A. B. Abrahamsen, “Modelling, Construction, and Testing of a Simple HTS Machine Demonstrator,” IEEE Energy Conversion Congress and Exposition (ECCE 2011), pp. 1636-1640, Phoenix, Arizona, USA, Sept. 2011. http://dx.doi.org/10.1109/ECCE.2011.6063978
  • A. B. Abrahamsen, B. B. Jensen, “Design Study of Coated Conductor Direct Drive Wind Turbine Generator for Small Scale Demonstration,” European Conference on Applied Superconductivity (EUCAS2011), Hauge, Netherlands, Sept. 2011.
  • N. Mijatovic, B. B. Jensen, C. Træholt, A. B. Abrahamsen, V. M. R. Zermeno, N. F. Pedersen, “HTS Machine Laboratory Prototype,” European Conference on Applied Superconductivity (EUCAS2011), Hauge, Netherlands, Sept. 2011.
  • V. M. R. Zermeno, A. B. Abrahamsen, N. Mijatovic, M. P. Sørensen, B. B. Jensen, N. F. Pedersen, “Simulation of an HTS Synchronous Superconducting Generator,” European Conference on Applied Superconductivity (EUCAS2011), Hauge, Netherlands, Sept. 2011.
  • N. Mijatovic, B. B. Jensen, C. Træholt, A. B. Abrahamsen, “High Temperature Superconducting Machine Prototype,” International Conference on Electrical Machines and Systems (ICEMS2011), Beijing, China, August 2011. http://dx.doi.org/10.1109/ICEMS.2011.6073372
  • B. B. Jensen, A. B. Abrahamsen, M. P. Sørensen, J. B. Hansen, “A Course on Applied Superconductivity Shared by Four Departments,” 7th International CDIO Conference, Copenhagen, Denmark, June 2011.
  • M. L. Henriksen, B. B. Jensen, ”Induction Generators for Direct-Drive Wind Turbines,” IEEE International Electric Machines and Drives Conference (IEMDC2011), Niagara Falls, Canada, May 2011. http://dx.doi.org/10.1109/IEMDC.2011.5994759
  • B. B. Jensen, A. B. Abrahamsen, M. L. Henriksen, “Influence of Rare Earth Element Supply on Future Offshore Wind Turbine Generators,” Risø International Energy Conference, Roskilde, Denmark, May 2011.
  • A. B. Abrahamsen, B. B. Jensen, E. Seiler, N. Mijatovic, N. H. Andersen, J. Østergaard, ”Superconducting Wind Turbine Generators,” 23rd International Symposium on Superconductivity (ISS2010), Tsukuba, Japan, Nov. 2010. (Invited)
  • B. B. Jensen, A. G. Jack, “Toroidally Wound Induction Machines,” 19th International Conference on Electrical Machines (ICEM2010), Rome, Italy, Sept. 2010. http://dx.doi.org/10.1109/ICELMACH.2010.5607750
  • N. Mijatovic, B. B. Jensen, C. Træholt, V. M. R. Zermeno, M. P. Sørensen, A. B. Abrahamsen, “Coil Optimization for HTS Machines,” Applied Superconductivity Conference (ASC2010), Washington D.C., Sept. 2010.
  • B. B. Jensen, A. G. Jack, “Permeability of Major and Minor Loops,” Postgraduate Conference (PGC2008), Newcastle upon Tyne, United Kingdom, 2008.
  • B. B. Jensen, A. G. Jack, “Parameter Estimation for Induction Motors using 2D Finite Element Modelling,” Postgraduate Conference (PGC2007), Newcastle upon Tyne, United Kingdom, 2007.
Book Chapters
  • B. B. Jensen, T. Undeland, “Technologies for Electricity Generation in Wind Turbines,” Book Chapter 7 in “The Political Economy of Renewable Energy and Energy Security – Common Challenges and National Responses in Japan, China and Northern Europe,” Palgrave MacMillan, ISBN: 9781137338860, Sept. 2014.
  • A. B. Abrahamsen, B. B. Jensen, “Superconducting Direct Drive Wind Turbine Generators: Advantages and Challenges,” Book Chapter 3 in “Wind Energy Conversion Systems – Technology and Trends,” Springer, London, ISBN: 9781447122012, 2012. dx.doi.org/10.1007/978-1-4471-2201-2_3
Publications and Presentations without Peer-Review
  • S. Högberg, B. B. Jensen, “Smart Use of Permanent Magnets in Permanent Magnet Couplings,“ Danish Magnetic Society General Meeting, Lyngby, Denmark, Mar. 2014.
  • B. B. Jensen, ”Superconducting Wind Turbine Generators,” Francis Bitter Magnet Laboratory, MIT, Boston, MA, USA, Jan. 2014.
  • N. Mijatovic, B. B. Jensen, “Optimizing the Usage of High Temperature Superconductor in Direct Drive Wind Turbines,” Applied Magnetic Materials (AMM2013), Pori, Finland, Oct. 2013.
  • S. Högberg, B. B. Jensen, “Reducing Usage of Permanent Magnet Material in Magnetic Couplings Using Finite Element Analysis,“ Applied Magnetic Materials (AMM2013), Pori, Finland, Oct. 2013.
  • F. Muhammed, B. B. Jensen, “Electric Two Wheelers – Zero Emission Solution for Urban Door to Door Transportation,” DTU International Energy Conference 2013, Lyngby, Denmark, Sep. 2013.
  • N. Mijatovic, B. B. Jensen, “Choice of Technology for Direct-Drive Wind Turbines – Superconducting Generators,” 3rd International Conference on E/E Systems for Wind Turbines, Bremen, Germany, May 2013. (Invited)
  • M. L. Henriksen, B. B. Jensen, ”Relating Cost of Energy to the Electromagnetic Design of Wind Turbine Generators,” Dansk Forskning i Vindkraft, Fredericia, Denmark, May 2013.
  • A. B. Abrahamsen, B. B. Jensen, H. Polinder, “Superconducting Direct Drive Generators for Large Offshore Wind Turbines”, European Wind Energy Conference & Exhibition (EWEA2013), Vienna, Austria, Feb. 2013. (Invited)
  • B. B. Jensen, N. Mijatovic, “Superconducting Electrical Machines for Wind Turbine Applications”, Seminar arranged by The Danish Society of Engineers, IDA and IEEE Denmark, Lyngby, Denmark, Feb. 2013.
  • N. Mijatovic, B. B. Jensen, “Experience from the First Superconducting Machine in Denmark”, Seminar arranged by The Danish Society of Engineers, IDA and IEEE Denmark, Lyngby, Denmark, Feb. 2013.
  • B. B. Jensen, “Stator Configurations for Superconducting Wind Turbine Generators”, Magnomatics, Sheffield, UK, Jan. 2013.
  • B. B. Jensen, “Minimizing Magnetic Materials by Design and Recycling”, Sintex, Hobro, Denmark, Jan. 2013.
  • N. Mijatovic, B. B. Jensen, “Design of HTS wind energy electrical machines”, Workshop on Electrical Machines with High Temperature Superconducting (HTS) Technology for Wind Power Applications”, Barcelona, Spain, December 2012.
  • B. B. Jensen, “Prototypes and Testing in Working Conditions”, IMDEA, Madrid, Spain, Dec. 2012.
  • B. B. Jensen, “University Educations and Teaching”, Center of Maritime Studies and Engineering, Faroe Islands, Nov. 2012.
  • B. B. Jensen, “Superconducting Machines for Wind Turbine Applications”, KTH, Stockholm, Nov. 2012.
  • B. B. Jensen, “Brushless DC Machines – BLDC”, DSB, Copenhagen, Denmark, Nov. 2012.
  • B. B. Jensen, “Recyclable Electrical Machines”, Danmarks Teknologisk Institut, Taastrup, Denmark, Oct. 2012.
  • B. B. Jensen, P. J. Masson, “History and Latest Development of Superconducting Machines,” 20th International Conference on Electrical Machines (ICEM2012), Marseille, France, Sept. 2012. (Invited 4 hour tutorial)
  • B. B. Jensen, “Latest Development in Wind Turbine Generators and Fault Detection by means of Electric Signature Analysis”, Offshore Wind Power Plants Workshop, KEPCO, Korea, Aug. 2012.
  • B. B. Jensen, “Wind Turbine Generators – Design Aspects,” 7th Wind Energy Systems Workshop – Integrating the Pieces, Roskilde, Denmark June 2012.
  • A. B. Abrahamsen, B. B. Jensen, N. Mijatovic, V. M. R. Zermeno, “Active Materials of Superconducting Direct Drive Wind Turbines,” 7th Wind Energy Systems Workshop – Integrating the Pieces, Roskilde, Denmark June 2012.
  • B. B. Jensen, N. Mijatovic, A. B. Abrahamsen “Advantages and Challenges of Superconducting Wind Turbine Generators,” 2nd International Conference on E/E Systems for Wind Turbines, Bremen, Germany, May. 2012.
  • B. B. Jensen, “Development in Wind Turbines”, University of the Faroe Islands, Dec. 2011.
  • B. B. Jensen, “Superconducting Generators for Wind Turbines”, Aalborg University, Denmark, Nov. 2011.
  • B. B. Jensen, N. Mijatovic, A. B. Abrahamsen, C. Træholt, “Minimising the Usage of Superconducting Tape in Electrical Machine Applications,” Superconductivity for Offshore Wind Turbines (SOWiT2011), Rome, Italy, Oct. 2011.
  • B. B. Jensen, A. B. Abrahamsen “High Temperature Superconducting (HTS) technology for wind generators,” 2nd International Conference on Drivetrain Concepts for Wind Turbines, Bremen, Germany, Oct. 2011.
  • B. B. Jensen, A. B. Abrahamsen, “Superconducting generators for direct drive wind turbines,” 2nd International Conference on Drivetrain Concepts for Wind Turbines, Bremen, Germany, Oct. 2011.
  • B. B. Jensen, “Mission Impossible? 100% Renewable Energy Society: The European Story - Denmark,” IEEE Energy Conversion Congress and Exposition (ECCE2011), Phoenix, Arizona, USA, Sept. 2011. (Invited talk for rap session)
  • B. B. Jensen, “Electrical Machines Research at DTU”, ABB Corporate Research Center, Raleigh, North Carolina, USA, May 2011.
  • A. B. Abrahamsen, B. B. Jensen, “Active materials for future wind turbine generators: From Copper to R2Fe14B and Rba2Cu3O6+x?”, International Conference E/E Systems for Wind Turbines, Bremen, Germany, May 2011.
  • B. B. Jensen, A. B. Abrahamsen, N. Mijatovic, C. Træholt, “Superconducting Machines at the Technical University of Denmark,” Danish Magnetics Society General Meeting, Aarhus, Denmark, March 2011.
  • M. L. Henriksen, B. B. Jensen, “Asynchronous Generators for use in Gearless Wind Turbines,” Danish Magnetics Society General Meeting, Aarhus, Denmark, March 2011.
  • B. B. Jensen, A. B. Abrahamsen, E. Seiler, N. Mijatovic, V. M. R. Zermeno, “Multi-Pole HTS Generators for Direct Drive Wind Turbines,” 5th Nordic Conference on Magnet Technology – Superconductivity in Energy Technology Applications, Tampere, Finland, Nov. 2010.
  • B. B. Jensen, “A Physical Understanding of Transients in Synchronous Machines,” IEEE Industry Applications Society 45th Annual Meeting, Houston, Texas, Oct. 2010. (4 hour tutorial)
  • B. B. Jensen, “Why use Permanent Magnet Generators in Wind Turbines,” Danish Wind Industry Association Annual Conference 2010, Bredsten, Denmark, August 2010.
  • A. B. Abrahamsen, E. Seiler, N. Mijatovic, B. B. Jensen, T. Zirngibl, C. Træholt, M Henriksen, P. B. Nørgård, A. Lystrup, C. S. Jacobsen, J. B. Hansen, J. C. Grivel, P. Mozhaev, V. M. R. Zermeno, M. P. Sørensen, N. F. Pedersen, N. H. Andersen, J. Østergaard, ”Superconducting Wind Turbines,” Dutch Power Innovation Day, Twente, Netherland, March 2010.
  • A. G. Jack, B. C. Mecrow, G. J. Atkinson, B. B. Jensen, “Soft Magnetic Composites for Electrical Machine Applications,” 4th Nordic Conference on Magnet Technology – Magnetic Materials in Electrical Machine Applications, Pori, Finland, Nov. 2009.
  • G. J. Atkinson, A. G. Jack, B. B. Jensen, J. Washington, “Soft Magnetic Composite in Optimised Machine Design,” UK Magnetic Society Seminar on Cutting Costs by Optimised use of Materials, Solihull, UK, April 2009.
  • A. G. Jack, B. C. Mecrow, G. J. Atkinson, B. B. Jensen, “Soft Magnetic Composites for Electrical Machines – Concepts and Applications,” Danish Magnetic Society Seminar on Soft Magnetic Composite, Hobro, Denmark, 2009.
  • B. B. Jensen, “Research Opportunities in the Faroe Islands,” TransAtlantic Climate Conference (TACC2008), Faroe Islands, 2008. Part 1 and Part 2.
  • A. G. Jack, B. C. Mecrow, G. J. Atkinson, B. B. Jensen, “Soft Magnetic Composites for Electrical Machines – State of the Art,” 3rd International Workshop on Magnetism and Metallurgy (WMM2008), Gent, Belgium, 2008.